Microsoft Haunted by 17-year old 'feature'

It looks like that every Windows version is susceptible to a 17-year old 'feature' that could give hackers access to your computer. The 'feature' exist since Windows v3.51, which dates from the last century (this way it looks even older :-) )

The person (Tavis Ormandy) who discovered this feature did a full disclosere which can be found here. So you'd better start watching your 3.51 Operating Systems (and above).

Extend Windows System Partition under VMWare

When working with Virtual Machines (VM's) you probably work with templates (and/or) clones to create new VM's. When you do this, you basically get a fixed drive with this. The size of the drives are basically the size from when you created them in the past. Since people put more and more crap programs in these VM's, you'll need more, and more diskspace.

Under VMWare it's relatively simple to add space to a virtual disk (vmdk), or even add an additional disk to the VM. The problem is that this works for creating additional partitions or extend existing NON primary system partitions. This means that you can't enlarge your C: partition, a partition where (under normal circumstances) all your programs are installed.

Click to read more ...

Nikon Scan 4 and Snow Leopard

My dad switched to an iMac a couple of weeks ago. He came from a Windows environment with lots of periferals (RF Mouse, Bluetooth dongle, HP flatbed Scanner, Espon printer, Nikon CoolScan V, HP PDA, etc.). So the challenge was to migrate as many periferals as possible.

Thankfully, most of them worked. Even the old Nikon CoolScan V film scanner worked with the supplied Nikon Scan 4 software, until last Sunday. For some reason the application crashes with a message that the preferences file can't be read (Is another instance of Nikon Scan 4 running??).

It seemed that the Nikon app wasn't shut down properly on one occasion and a lock file was left in the preferences. Removing the lock file solved the issue.
The lock file is located at the following location:

~/Library/Preferences/Nikon/Nikon Scan 4 Prefs.lock

Sidenote: Weird that relatively old propriatary software like the Nikon Scan 4 software works fine, but that more recent (Nikon) software needs special updates to keep working under Snow Leopard. Was Nikon Scan 4 written by people who understand what they were doing (OS sub-version independent)? Or is this just luck?

Update on Friday, November 20, 2009 at 21:30 by Willem

Eventhough the Nikon Scan software works in Snow Leopard (OSX 10.6), Nikon abandonned the support for Nikon Scan 4 a while back. Alternatively you could use SilverFast from LaserSoft (commercial software).

Windows 8 & 9 in 128bit mode

Yes, you're reading it correct. Microsoft intends to deliver a 128bit kernel in the next Windows versions. A bit ambitious if you ask me. The 'current' 32bit operating systems run fine, because the drivers for those operating systems are widely available.
Have you ever tried to get your hands on 64bit drivers for hardware not older than two years? I tried, but failed eventually, since there's still one unknown device in my Vista x64 install.

I'm sure that Microsoft will use some layered model with the 128bit OS. That way you can use 128, 64, 32, and maybe even 16 and 8 bit drivers and applications. This way everythin will run, but don't expect stability.

What's wrong with going full 64bit first? No 32bit (hardware) drivers, the only 32bit that's allowed are 32bit applictions (which run in a special 32bit mode). From there forward you you start with 128bit OS (with 128bit drivers only) and minimum 64 bit applications. You need 32bit? -> VMWare (or MS own HyperVisor thinghy).

 I still run into incompatibility issues with my <2 year old Fujitsu laptop running Vista Business x64. They should fix that first, and move on after that.

Windows Vista x64 and Fujitsu Hardware

No x64 SupportOké. I have this Fujitsu Lifebook E8310 from work (we're not allowed to use Apple hardware :( ). This piece of hardware was released with an OEM version of Vista Business, but work-related circumstances forced me to install Windows XP at first. Now about 1.5 years later I wanted to try the included Vista Business version, and since I have 4GB RAM I installed the x64 version. What's the use of the additional RAM otherwise?

B.t.w., you may see this as an addition to this posting about Windows 7.

Installing Vista Business x64 isn't the problem (so this is no rant against Microsoft), but trying to get every piece of (integrated) hardware to function properly is something completely different. Vista is on the market for ages (or so it seems), and still NO decent driver and application support for the x64 versions (example 1, 2, 3 of an endless list). What the f#ck is wrong with hardware (and software) developers? 64bit (client) computing is available since the release of Windows XP. Every new piece of WINTEL hardware released in the last two years has (multiple) 64bit cores or CPU's.

x64 Operating Systems mean that you have more memory at your disposal to do bigger (memory consuming) tasks. Windows-based 32bit systems can only address up to  3.2GB of memory.

As long as this will continue to stay this way, I'll continue to rant about this, and personally not buying (or advice) any more WinTel hardware (or software).

Snow Leopard So Far

The last couple of days have been Snow Leopard only. The Windows 7 hard disk is still gathering lots of dust in the corner.
Even though my Snow Leopard version may not be the final version, it feels solid on most fronts. Finder is even more intuitive. It starts to grow on me :).

I ordered my copy today. You can pre-order Snow Leopard in the Apple Online Store (upgrade costs around 29 euro/USD). With the free shipping it's a bargain (normally you need to spend >100 euro/USD for free shipping). This offer (free shipping) expires on August 27th 2009.

Upgrading to OSX Snow Leopard

I tried to upgrade to OSX Snow Leopard today. 'Tried' is the keyword here. It seems though that the current installment of OSX (Leopard) is installed on a file system supposedly UNSUPPORTED by Apple OSX Snow Leopard.

NOTE: I have no way of knowing if the release I have is the final 'Gold Master'. So it could be that my findings are irrelevant for the actual (official) Snow Leopard OS.
I will however verify my findings when I have the actual 'Gold Master' in my possession.

When you run the installer from the OS (or by booting from the DVD) I get a error message saying that I need a GUID Partitione Table disk to install the new OS on. Somehow I use a different (and unsupported) partition scheme. And I thought that I selected all the best options during the clean install a while back......

There's no way of converting (using Disk Utility and/or Terminal commands) this to the appropriate settings without formatting your hard drive. So a normal upgrade is out of the question for me (or so it seems). And for many others I guess, since I won't be the only one with the 'wrong' partition table setup.

Click to read more ...

Windows 7 First Impression

Am I growing a cynic, or is this a case being an Apple 'fanboy'? Even though I think I'm open-minded in the world of Operating Systems, I seem to be less and less fond of the latest Microsoft CLIENT Operating Systems. Note the all caps 'client' word. I have no problem whatsoever with the server versions (so far).

Today I installed Windows 7 Enterprise (MSDN edition) on a spare SATA disk in my work laptop (Fujitsu-Siemens Lifebook E8310). Initially installing the OS wasn't the problem. The bad things happened when I wanted to install the drivers and work-related software.

I must note that this review might not be very representative. My experience with Vista is about 8 hours total, and as you will find out later on; Windows 7 added about 4 hours today.

Anyway, back to the 'review';
The installation takes (almost) no user input whatsoever. Only things the OS needs to know are;

• clean install or upgrade
• regional settings
• username with a password

The first time Windows booted, I was already getting annoyed with the bouncing / rotating balls in the boot splash screen. They could have used the resources for creating this (either in functionality development ($$$) of the OS, or in speeding up booting the system) for booting faster instead of using CPU-cycles.

For comparison; Apple has a tiny spinning wheel to indicate that the system is booting, no splash screen, and is less expensive (probably $29 USD for an upgrade).

Click to read more ...

SSH Connection to Juniper Devices

While in the mids of my Juniper exam preparation I ran into a problem with my Apple equipment. Managing the Juniper firewall (SSG5 in this case) with SSH was not possible from OSX. The connection itself would work, but after entering the password the connection was closed by the remote host (the firewall).
Trying this from a Windows laptop (with SecureCRT) everything worked as expected.

Some searching revealed that this is an OpenSSH bug. To manage your Juniper with SSH from OSX you need to add a parameter to the ssh command (or edit the SSH config file).

Parameter to add:

-o ControlMaster=auto
e.g. ssh willem@127.0.0.1 -o ControlMaster=auto

Or add the following line to the global SSH config (/etc/ssh_config) or the user config (~/.ssh/config).

ControlMaster auto

Juniper has a knowledgebase article (KB12409) on the issue.

And Another Reason To Use OSX

Microsoft Windows (no matter what version) is the favorite platform for virusses, trojans, malware and other crap. The way to keep the operating system neat and tidy you should use protection. Protection in the form of anti-virus software and other (required) software to guarantee your survival on the World Wide Web.

Well, protection isn't what it used to be :) . It seems that an update of AVG antivirus recognizes user32.dll as a bit of malicious code. Is this bad you ask? Well.... Windows won't work/boot without it. Ironic?

The solution for this problem is to ask someone with proper knowledge and follow this procedure (dutch forum).